Loading... Please wait...Stagebar 2™ Specifications
With twice the lumen output and 10 times the intensity of the Stagebar 54, the Stagebar 2 is an extremely capable LED pixel bar and wash luminaire. This exceptional performance is obtained by combining the latest LED technology with an advanced lens design. The Stagebar 2 offers a wide range of shades from an RGBAW color mixing system and is useful for displaying imagery and video or for floodlighting surfaces and stages. |
||
| Features | ||
|
||
Physical |
||
| Length: 420 mm (16.5 in.), Stagebar 2 S | ||
| Length: 630 mm (24.8 in.), Stagebar 2 L | ||
| Width: 190 mm (7.5 in.) | ||
| Height: 105 mm (4.1 in.) | ||
| Weight: 5.5 kg (12.1 lbs.) without bracket, Stagebar 2 S | ||
| Weight: 7.3 kg (16.1 lbs.) without bracket, Stagebar 2 L | ||
Dynamic Effects |
||
| Color mixing: RGBAW | ||
| Red: 0 - 100% | ||
| Green: 0 - 100% | ||
| Blue: 0 - 100% | ||
| Amber: 0 - 100% | ||
| White: 0 - 100% | ||
Control and Programming |
||
| Color control modes: RGBAW, RGB, HSI, HSIC | ||
| DMX channels: 3 - 30 | ||
| Grouped pixel control options: 6 x 1 (individual), 3 x 2, 2 x 3 or 1 x 6 (all as one group) pixels | ||
| DMX address setting: Manual, auto addressing and auto address copy | ||
| Fixture setup: Onboard control panel with display | ||
| Display: Battery-powered backlit LCD, 2 x 16 characters | ||
| 16-bit control (internal): RGBAW, RGB, HSI, HSIC | ||
| Protocol: USITT DMX512-A | ||
| Receiver: RS-485 | ||
| Firmware update: Serial upload via DMX link | ||
Photometric Data |
||
| Light source: Cree XP-E high power emitters | ||
| Total LED power per bar: 150 W | ||
| Even pitch across adjacent fixtures: Horizontal/vertical (Stagebar 2 L), horizontal (Stagebar 2 S) | ||
| Total output (max.): 3650 lm | ||
Construction |
||
| Color: Black | ||
| Housing: Steel and aluminum | ||
| Finish: Electrostatic powder-coated | ||
| Protection rating: IP20 | ||
Installation |
||
| Mounting points: Adjustable mounting bracket, 1/4-turn locks, four M6 threaded holes | ||
| Orientation: Any | ||
Connections |
||
| Power in/out: Neutrik PowerCon | ||
| Data in/out: 5-pin locking XLR | ||
Electrical |
||
| AC power: 100-240 V nominal, 50/60 Hz | ||
| Power supply unit: Integrated, auto-sensing multi-voltage | ||
| Power output fuse: 15 AT (slow blow) | ||
| Main fuse: 4 AT (slow blow) | ||
Typical Power and Current |
||
| 100 V, 50 Hz: 238 W. 2.5 A, PF 0.998 | ||
| 100 V, 60 Hz: 240 W, 2.5 A, PF 0.998 | ||
| 110 V, 60 Hz: 237 W, 2.3 A, PF 0.997 | ||
| 120 V, 60 Hz: 233 W, 2.1 A, PF 0.996 | ||
| 208 V, 60 Hz: 228 W, 1.2 A, PF 0.986 | ||
| 220 V, 50 Hz: 227 W, 1.1 A, PF 0.986 | ||
| 220 V, 60 Hz: 244 W, 1.3 A, PF 0.984 | ||
| 230 V, 50 Hz: 225 W, 1.1 A, PF 0.986 | ||
| 240 V, 50 Hz: 224 W, 1.0 A, PF 0.984 | ||
| Figures apply to both S and L models with all LEDs at max. intensity. Measurements made at nominal voltage. Allow for a deviation of +/- 10%. | ||
Thermal |
||
| Cooling: Filtered forced air (temperature-regulated, low noise) | ||
| Maximum ambient temperature (Ta max.): 40° C (104° F) | ||
| Minimum ambient temperature (Ta min.): 5° C (41° F) | ||
| Maximum surface temperature, steady state, Ta=40° C: 90° C (194° F) | ||
| Total heat dissipation (calculated, +/- 10%): 860 BTU/hr. | ||
Licensing |
||
| Available under license from Color Kinetics Incorporated | ||
Approvals |
||
| EU safety: EN 60598-2-17 (EN 60598-1), EN 62471 | ||
| EU EMC: EN 55 015, EN 55 103-1, EN 55 103-2 | ||
| US safety: ANSI/UL 1573 | ||
| Canadian safety: CAN/CSA E598-2-17 (CAN/CSA E60598-1) | ||
Included Items |
||
|
||
|
||
|
||
|
||
|
||
Accessories |
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
Related Items |
||
|
||
Spare Parts |
||
|
||
|
||
|
||
|
||
Ordering Information |
||
|
||
|
||
© 2011-2012 Martin Professional A/S. Specifications subject to change without notice |
||
Choose a currency below to display product prices in the selected currency.